Cisco SFS 7008 Manuale Utente Scaricare il pdf (Pagina 27)

Connect an Ethernet Cable to the Ethernet

Management Port

3. Connect an Ethernet cable to the Ethernet port of the left Management Interface module (slot

number 15). See Figure 2-7.

a. If you have two Management Interface modules, you may also want to connect an Ethernet

cable to the standby module (slot 16) to maintain Ethernet connectivity in the event of a

fail-over.

Recommended Management Configuration

The diagram below shows the recommended management port connections. To have constant access to

the chassis remotely, redundantly connect the serial ports on two Management Interface cards to a

terminal server.

Figure 2-7: Recommended Management Configuration

Power on the Chassis

Use only the power cable provided with your InfiniBand system.

4. Remove the power cords from the shipping package.

One power cord UL rated 12 Amps/125 VAC or greater is provided by default. If you have a

high-availability unit, you will have a second power cord.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 107 108

Nessun commento

Cisco SFS 7008 Manuale Utente Pagina 27