
1-18 Chapter 1: Routing
Cisco 1900 Series supports a wide range of modules that span an industry-leading breadth of services at the branch office.
Please refer to the following link for the list of modules supported on the Cisco 1900:
http://cisco.com/en/US/products/ps1900/products_relevant_interfaces_and_modules.html.
Selected Part Numbers and Ordering Information
Weight-with AC power
supply (no modules)
12 lbs 7 lb
Weight-with PoE power
supply (no modules)
12.8 lbs 7 lbs (external PoE)
Maximum Weight-Fully
Configured
14 lbs 8 lbs
Airflow
Front to Side Back to side
Cisco 1941W WLAN Specifications
WLAN hardware
• IEEE 802.11n draft 2.0 standards-based access point with 802.11a/ b/g compatibility
• Automatic rate selection for 802.11a/g/n
• Dual radios for 802.11b/g/n and 802.11a/n modes.
• RP-TNC connectors for field-replaceable external antennas
• 2-dB default antenna gain
• 2 x 3 multiple input, multiple output (MIMO) radio operation
• Wi-Fi 802.11n Draft v2.0 certified
WLAN software features
• Autonomous or unified access point
• Cisco WCS support for monitoring of autonomous-mode access points
• Option to maximize throughput or maximize range
• Software-configurable transmit power
• Radio roles, including access point, root bridge, non-root bridge, and workgroup bridge
• Wi-Fi Multimedia (WMM) certification
• Traffic specifications (TSPEC) Call Admission Control (CAC) to ensure voice quality is
maintained
• Unscheduled Automatic Power Save Delivery (UPSD) to reduce latency
Unified WLAN management
• Unified access point features:
• Supported by wireless LAN controller and Cisco WCS
• Configurable local or central switching for HREAP mode
• Radio management through Cisco WCS
• Transparent roaming with mobility groups
Certifications
Service Set Identifiers
(SSIDs)
16
Wireless VLANs
16
WLAN security features
• Standard 802.11i
• Wi-Fi Protected Access (WPA) and AES (WPA2)
• EAP authentication: Cisco LEAP, PEAP, Extensible Authentication Protocol Transport Layer
Security (EAP TLS), Extensible Authentication Protocol-Flexible Authentication via Secure
Tunneling (EAP-FAST), Extensible Authentication Protocol-Subscriber Information Module
(EAP-SIM), Extensible Authentication Protocol-Message Digest Algorithm 5 (EAP-MD5), and
Extensible Authentication Protocol-Tunneled TLS (EAP-TTLS)
• Static and dynamic Wired Equivalent Privacy (WEP)
• Temporal Key Integrity Protocol/Simple Security Network (TKIP/SSN) encryption
• MAC authentication and filter
• User database for survivable local authentication using LEAP and EAP-FAST
• Configurable limit to the number of wireless clients
• Configurable RADIUS accounting for wireless clients
• Pre-Shared Keys (PSKs) (WPA-small office or home office [WPA-SOHO])
Encrypted wireless VLANs
16
Multiple Broadcast Service
Set Identifiers (MBSSIDs)
16
Online model comparison chart: http://www.cisco.com/en/US/products/ps10536/prod_series_comparison.html
Cisco 1900 Series Router
CISCO1941/K9 Cisco 1941 w/2 GE, 2 EHWIC slots, 256MB CF,512MB DRAM,IP Base
CISCO1921/K9 CISCO 1921 Modular Router, 2 GE, 2 EHWIC slots, 256F/512D, IP Base
Cisco 1900 Series Wireless Bundles
CISCO1941W-A-N-SEC/K9 Cisco 1941 Router w/ 802.11 a/b/g/n FCC Compliant WLAN ISM, SEC Lic
CISCO1941W-E-N-SEC/K9 Cisco 1941 Router w/ 802.11 a/b/g/n ETSI WLAN ISM, SEC Lic
Commenti su questo manuale