Cisco CTX2500 Informazioni Techniche Pagina 20
- Pagina / 30
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
20
Response Example:
TID-000 1998-06-20 14:30:00
M 001 COMPLD
“FAC-2-1,OC3:CR,LOS,SA,01-01,16-02-15,,,\“LOS OF SIGNAL\””
;
RTRV-PM-T1
Use the RTRV-PM-T1 command to retrieve actual performance monitoring values on a DS1 port. The
RTRV-PM-T1 command is listed as RTRV-PM-<MOD2> in the Cisco ONS SONET TL1 Command
Guide. T1 is just one of the options you can enter. RTRV-PM-T1 is from the Performance category.
Input Format:
RTRV-PM-<MOD2>:[<TID>]:<AID>:<CTAG>::[<MONTYPE>],[<MONLEV>],[<LOCN>],
[<DIRECTION>],[<TMPER>],[<DATE>],[<TIME>];
• TID is the name of the node you want to access. If you only want to query the node you connected
to leave the TID blank.
• AID is the access identifier to indicate slot and port.
• CTAG is any non-blank character series that does not have to be unique.
• MONTYPE is a monitored type. A null value is equivalent to ALL.
• MONLEV specifies the discriminating level for the requested monitored parameter. MONLEV is
in the format of LEVEL-DIRN where LEVEL is the measured value of the monitored parameter
(MONVAL) and DIRN is the type of DIRN. A null value defaults to 1-UP which means it only
shows values 1 and higher.
• LOCN indicates the location. A null value defaults to NEND.
• DIRECTION is the direction of PM relative to the entity identified by the AID. DIRN defaults to
ALL which means that the command retrieves all the registers irrespective of the PM direction.
Values are BTH (both), RCV (receive), and TRMT (transmit).
• TMPER is the accumulation time period for the PM information. A null value defaults to 15-MIN.
• DATE is the beginning date of the PM or storage register period specified in TMPER. DATE is
MM-DD where MM (month of year) ranges from 1 to 12 and DD (day of month) ranges from 1
to 31. A null value defaults to the current date.
• TIME is the beginning time of day of the PM or storage register period specified in TMPER. TIME
is HH-MM where HH (hour of day) ranges from 0 to 23 and MM (minute of hour) ranges from
0 to 59. A null value defaults to the current time (HH-MM).
Input Example:
RTRV-PM-T1:TID:FAC-2-1:123::CVL,10-UP,NEND,BTH,15-MIN,04-11,12-45;
- 1 What is TL1? 2
- 3 Connect to TL1 5
- Telnet to Open a TL1 Session 6
- ONS 15600 7
- 4 Log Into TL1 8
- Commands or Autonomous 9
- Applicable Command or 10
- Autonomous Message 10
- 6 Ten Basic Commands 11
- RTRV-ALM-T1 15
- RTRV-COND-T1 17
- RTRV-ALM-ALL 18
- RTRV-COND-ALL 19
- RTRV-PM-T1 20
- RTRV-TH-T1 21
- OPR-LPBK-T1 22
- 7 Log Out of TL1 23
- 8 Obtaining Documentation 24
- 9 Documentation Feedback 25
- Submitting a Service Request 27
Prodotti e manuali riguardandi Networking Cisco CTX2500
Networking Cisco WMA11B Guida Utente
(32 pagine)
(32 pagine)
Networking Cisco 7301 Informazioni Techniche
(40 pagine)
(40 pagine)
Networking Cisco ISE - Line Card ISE Specifiche
(82 pagine)
(82 pagine)
Networking Cisco SPA3102 Guida Utente
(100 pagine)
(100 pagine)
Networking Cisco 1005 - 1005 Router Guida Utente
(24 pagine)
(24 pagine)
Networking Cisco WRT150N Guida Utente
(90 pagine)
(90 pagine)
Networking Cisco PIX-515E Specifiche
(78 pagine)
(78 pagine)
Networking Cisco MWR-1941-DC-2T1 - MWR 1941 Mobile Wireless Edge Router Manuale delle Istruzioni
(66 pagine)
(66 pagine)
Networking Cisco 3631 Guida di Installazione
(44 pagine)
(44 pagine)
Networking Cisco CISCO7576 Specifiche
(30 pagine)
(30 pagine)
Networking Cisco NSLU2 Manuale Utente
(2 pagine)
(2 pagine)
Bos manuels
La liste des produits de Bos contient 57 les manuels et guides d'utilisation des modèles 49 dans les appareils de type 2
Commenti su questo manuale