Cisco CTX2500 Guida Utente Pagina 350
- Pagina / 530
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
3-274
Cisco Transport Manager Release 9.2 GateWay/CORBA User Guide and Programmer Manual
OL-20937-01
Chapter 3 Using CTM GateWay/CORBA Interfaces
3.13.9 getHoldingTime
Compliance
CTM-defined.
3.13.9 getHoldingTime
Synopsis
void getHoldingTime(out HoldingTime_T holdingTime)
raises(globaldefs::ProcessingFailureException);
Description
The NMS requests from the EMS the number of hours that it stores 15-minute and 24-hour PM data
records. This interface reports the minimum time. If the EMS does not store PM data, this method reports
the time supported by the NE (the minimum time of all managed NEs).
Note CTM gives you the option to configure the holding time through the CTM GUI client.
Parameters
CTM support for the HoldingTime_T structure is as follows:
• Short storeTime24hr—Minimum store time, in hours, for 24-hour data. CTM reports 0 if PM data
is held indefinitely.
• Short storeTime15min—Minimum store time, in hours, for 15-minute data. CTM reports 0 if PM
data is held indefinitely.
Throws
EXCPT_NOT_IMPLEMENTED - Raised if the EMS is unable to support this service.
EXCPT_INTERNAL_ERROR - Raised in case of nonspecific EMS internal failure.
EXCPT_NE_COMM_LOSS - Raised if communication to an NE is lost and the holding time cannot
be retrieved.
Compliance
TMF-defined.
3.13.10 getAllCurrentPMData
Synopsis
void getAllCurrentPMData(in PMTPSelectList_T pmTPSelectList,
in PMParameterNameList_T pmParameters,
in unsigned long how_many,
out PMDataList_T pmDataList,
out PMDataIterator_I pmIt)
raises(globaldefs::ProcessingFailureException);
Name Type Input/Output Description
holdingTime HoldingTime_T Out Time period (in hours) within which 15-minute and 24-hour PM
data records can be retrieved.
- GateWay/CORBA User Guide and 1
- Programmer Manual 1
- CONTENTS 3
- Contents 10
- OL-20937-01 10
- D Equipment List for NEs D-1 11
- Objectives 13
- Audience 13
- Conventions 14
- Related Documentation 14
- Overview of CTM GateWay/CORBA 21
- 1.3.1 Naming Service 24
- 1.3.2 Notification Service 24
- 1.3.2 Notification Service 25
- 1.4 Information Model 27
- 1.5 IDL-Related Changes 28
- 1.7 Summary 29
- 1.7 Summary 30
- NE- and CTM-Specific Details 31
- 2.1.3 ONS 15310 CL 32
- 2.1.3 ONS 15310 CL 33
- 2.1.4 ONS 15310 MA SDH 35
- 2.1.5 ONS 15310 MA SONET 36
- 2.1.6 ONS 15327 37
- 2.1.6.3 Topological Links 38
- 2.1.6.4 XTC Cards 38
- 2.1.7 ONS 15454 SDH 39
- 2.1.7 ONS 15454 SDH 40
- 2.1.8 ONS 15454 SONET 42
- 2.1.8.4 Topological Links 43
- 2.1.8.5 PTPs 43
- 2.1.9 ONS 15530 44
- 2.1.9.1 Slots 45
- 2.1.9.2 PTPs 45
- 2.1.10 ONS 15540 46
- 2.1.10.1 Slots 47
- 2.1.10.2 PTPs 47
- 2.1.10.3 CTPs 47
- 2.1.11 ONS 15600 SONET 48
- 2.1.11 ONS 15600 SONET 49
- 2.1.12 ONS 15600 SDH 51
- 2.1.13 MGX 8880/8850/8830 52
- 2.1.14 MDS 9000 52
- 2.1.15 Unmanaged NEs 52
- 2.2 CTM-Specific Details 53
- 2.2.1 Layer Rate 54
- 2.2.2 Inventory 57
- 2.2.3 Interfaces 58
- 2.2.4 Object Details 59
- 2.2.5 Naming Conventions 60
- PTP: OC12 61
- PTP: OC48 61
- PTP: OC192 62
- PTP: STM4 62
- PTP: STM16 62
- 2.2.5 Naming Conventions 63
- For OCHNC: 64
- For OCHCC: 64
- 2.2.5.6 Equipment 65
- 2.2.5.7 Equipment Holder 65
- 2.2.5.8 Topological Link 66
- 2.2.5.9 Protection Group 66
- 2.2.6 Programming Details 67
- 2.2.6.4 Exception Handling 68
- 2.2.7.2.2 Linear-Card Mode 70
- 2.2.7.2.3 Layer Rates 71
- 3.2 common::Common_I 94
- 3.3 emsMgr::EMSMgr_I 95
- • string userLabel 97
- Parameters 100
- Compliance 101
- Synopsis 101
- Description 101
- 3.3.8 createTopologicalLink 103
- 3.3.10 deleteTopologicalLink 107
- 3.3.11 modifyTopologicalLink 108
- 3.3.12 getEMS 109
- 3.3.13 getAllL2Topologies 111
- 3.3.13 getAllL2Topologies 112
- 3.3.14 getAllQoSTemplateNames 114
- 3.3.15 getAllQoSTemplates 114
- 3.3.15 getAllQoSTemplates 115
- 3.3.16 getQoSTemplate 117
- 3.3.19 createServerTrailLink 119
- 3.3.20 deleteServerTrailLink 122
- 3.3.21 addNetworkPartition 123
- 3.3.23 deleteNetworkPartition 125
- 3.4 EmsSession::EmsSession_I 126
- 3.4.2 getManager 127
- 3.4.3 getSupportedManagers 128
- 3.5.1 getEmsSession 128
- 3.5.2 getEmsPublicKey 129
- 3.5.3 getEmsPublicKeyPair 130
- 3.6.1 getAllEquipment 131
- 3.6.1 getAllEquipment 132
- 3.6.2 getAllEquipmentNames 139
- 3.6.3 getAllSupportedPTPs 139
- 3.6.3 getAllSupportedPTPs 141
- AdminState 142
- LineCode 142
- HasLaserBeenShutdown 144
- RestartLaser 144
- IPPMMonitor 144
- TrailTraceActualTx 144
- TrailTraceExpectedRx 144
- 3.6.4 getAllSupportedPTPNames 147
- 3.6.7 getContainedEquipment 149
- 3.6.8 getEquipment 150
- 3.6.9 provisionEquipment 151
- 3.6.10 setAlarmReportingOff 152
- 3.6.11 setAlarmReportingOn 153
- 3.6.12 unprovisionEquipment 154
- ONS 15600 SDH 157
- ONS 15600 SONET 157
- 3.8.1 getAllActiveAlarms 158
- 3.8.2 getAllSNCs 159
- 3.8.3 getAllManagedElements 161
- 3.8.5 getAllPTPs 164
- 3.8.6 getAllPTPNames 165
- 3.8.7 getContainedInUseTPs 166
- 3.8.12 getManagedElement 171
- 3.8.14 setAdditionalInfo 172
- 3.8.15 getTP 174
- 3.8.17 setTPData 176
- 3.8.26 forceNEResync 186
- 3.8.28 getAllRolls 187
- 3.8.29 getAllRollNames 189
- 3.8.30 getRoll 190
- 3.8.31 getRollToPTPs 190
- 3.8.32 getRollToCTPs 191
- 3.8.33 getRollFromCTPs 192
- 3.8.34 setPortName 193
- 3.8.35 getPortName 194
- 3.8.36 getAllClearedAlarms 194
- 3.8.37 getAllCrossConnections 196
- 3.8.39 setMEAdminState 198
- 3.9.1 getAllEdgePoints 199
- 3.9.2 getAllEdgePointNames 200
- 3.9.3 getAllManagedElement 202
- 3.9.9 getAllTopologicalLinks 207
- 3.9.13 getSNC 211
- 3.9.14 getSNCsByUserLabel 212
- 3.9.15 getTopologicalLink 213
- 3.9.17 CreateAndActivateSNC 222
- 3.9.19 addDrops 224
- 3.9.20 deactivateAndDeleteSNC 225
- 3.9.21 getVCATSNC 226
- 3.9.21 getVCATSNC 227
- 3.9.22 getAllVCATSNCs 228
- 3.9.23 getAllVCATSNCNames 229
- 3.9.24 getAllVCATMemberSNCs 230
- 3.9.26 createVCAT 232
- 3.9.27 deleteVCAT 234
- 3.9.28 addMemberSNCsToVCAT 234
- 3.9.32 upgrade 238
- 3.9.33 createRoll 239
- Scenarios: Roll Creation 241
- 3.9.34 deleteRoll 242
- 3.9.35 cancelRoll 243
- 3.9.36 forceValidSignal 243
- 3.9.37 completeRoll 244
- 3.9.38 finishRoll 245
- 3.9.39 getAllRolls 245
- 3.9.40 getAllRollNames 246
- 3.9.44 addManagedElement 250
- 3.9.44 addManagedElement 251
- 3.9.45 deleteManagedElement 255
- 3.10.1 createMLVLAN 256
- 3.10.1 createMLVLAN 257
- 3.10.4 modifyMLVLANPortState 261
- 3.10.5 modifyMLVLANRSTPState 262
- 3.10.6 modifyMLVLANTPQOS 263
- 3.10.8 getMLVLAN 265
- 3.10.9 deleteMLVLAN 265
- 3.10.10 getAllMLVLANs 266
- 3.10.11 getAllMLVLANNames 267
- 3.10.12 getAllAssociatedSNCs 268
- 3.10.13 getL2Topology 269
- 3.10.16 createL2Topology 271
- 3.10.16 createL2Topology 272
- Note sourceIsSTSGrooming and 276
- 3.10.17 deleteL2Topology 279
- 3.10.18 modifyL2Topology 280
- 3.11 E-Series VLAN Interfaces 281
- 3.11.1 createVLAN 282
- 3.11.2 deleteVLAN 282
- 3.11.3 getAllVLANs 283
- 3.12 nmsSession::NmsSession_I 284
- 3.12.3 alarmLossOccurred 285
- 3.13.1 disablePMData 286
- 3.13.2 enablePMData 287
- 3.13.3 setTCATPParameter 288
- LR_Fast_Ethernet 289
- LR_Gigabit_Ethernet 289
- LR_COS_100M 290
- LR_COS_Gigabit 290
- LR_T1_and_DS1_1_5M 291
- LR_GFP_Multirate 291
- 3.13.3 setTCATPParameter 292
- LR_POS_100M 303
- LR_POS_Gigabit 303
- LR_ESCON 306
- LR_RPR_IEEE_802_17 306
- LR_T3_and_DS3_45M 314
- LR_Optical_Transport_Section 315
- LR_Optical_Transport_Path 315
- LR_Optical_Transport_FEC 315
- LR_8b10b_2_5_Gigabit 317
- LR_VT1_5_and_TU11_VC11 317
- LR_E1_2M (only on DS1_E1_56) 317
- LR_OCH_ISC_PEERCOMPAT 323
- LR_LOW_ORDER_TU_VC3 332
- LR_VT2_AND_TU12_VC12 332
- LR_E4_140M 332
- LR_E3_34M 332
- LR_E1_2M 338
- 3.13.4 getTCATPParameter 343
- 3.13.5 getCTMHistoryPMData 344
- 3.13.8 getTPHistoryPMData 347
- • Granularity_T granularity 348
- 3.13.9 getHoldingTime 350
- 3.13.10 getAllCurrentPMData 350
- 3.13.11 getMEPMcapabilities 352
- 3.14.1 getAllProtectedTPNames 353
- 3.14.3 getProtectionGroup 355
- 3.14.5 createProtectionGroup 359
- Note 1:N is always 360
- 3.14.6 deleteProtectionGroup 362
- 3.15 session::Session_I 363
- 3.15.1 endSession 364
- 3.15.2 ping 364
- 3.16 mtnmVersion::Version_I 365
- 3.17.4 getAssociatedTPs 368
- 3.18.1 backupME 371
- 3.18.2 getMEBackupStatus 372
- 3.18.3 abortMEBackup 373
- 3.18.4 getBackupList 373
- 3.18.5 activateSoftwareOnME 374
- 3.18.6 revertSoftwareOnME 375
- 3.18.7 restoreME 376
- 3.18.8 getMERestoreStatus 376
- 3.18.9 abortMERestore 377
- 3.18.11 downloadMESoftware 379
- 3.18.13 getSWDownloadStatus 382
- Cause Mapping 383
- A.4 Supported Events 385
- A.4.2 Object Deletion 386
- A.4.3 Attribute Value Change 387
- A.4.4 State Change Event 388
- A.4.4 State Change Event 389
- A.4.5 Protection Switch 390
- A.4.7 Alarm 392
- A.4.8 Heartbeat Event 393
- A.4.9 Backup Status Event 393
- A.5 Probable Cause Mapping 394
- Shelf-Level Peripheral Alarms 396
- Sensor Alarms: VXSM 399
- Line-Level Alarms 399
- Line Stats Alarm 400
- A.5.4.1 ONS 15216 EDFA2 406
- A.5.4.2 ONS 15216 EDFA3 407
- FAN Alarms 432
- CPU Alarms 432
- Bias Temp Monitor Alarms 440
- APPENDIX 461
- CTM GateWay/CORBA 463
- Service-Related Issues 466
- B.13 Installation Program 472
- C.2.1 Recommended Tools 476
- C.2.2 Sample Code in Java 477
- GateWay/CORBA, page B-1 480
- C.2.3 Running the Client 483
- Equipment List for NEs 485
- OSC Subcard 498
- Mux/Demux Subcards with OSC 498
- LBR Transponder with Splitter 498
- Transponder with Splitter 499
- Transponder Without Splitter 502
- ESCON Line Card (10 Port) 503
- ESCON SFP 503
- 10 G Uplink Card 503
- 4-Channel Module 518
- 8-Channel Module 518
- 16-Channel Module 518
- 32-Channel Module 518
Prodotti e manuali riguardandi Networking Cisco CTX2500
Networking Cisco AG241 Guida Utente
(41 pagine)
(41 pagine)
Networking Cisco WS-C2950SX-48-SI Manuale Utente
(20 pagine)
(20 pagine)
Networking Cisco XR 12000 Specifiche
(136 pagine)
(136 pagine)
Networking Cisco 2821 - Integrated Services Router Unified Communications Bundle Manuale Utente
(3 pagine)
(3 pagine)
Networking Cisco WAE-7326-K9 Specifiche
(840 pagine)
(840 pagine)
Networking Cisco WRT120N Manuale Utente
(4 pagine)
(4 pagine)
Networking Cisco MGX-FRSM-2T3E3 Manuale Utente
(38 pagine)
(38 pagine)
Kenwood MFJ-286 manuali
Manuali dei proprietari e guide per l'utente per Microfoni Kenwood MFJ-286.
We fornisce 1 manuali pdf Kenwood MFJ-286 per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Commenti su questo manuale