Cisco 880 Series Guida di Installazione Scaricare il pdf (Pagina 52)

2-8

Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide

OL-16193-07

Chapter 2 Installing the Router

Installing the Router

Tip

When choosing a location for wall-mounting the router, consider cable limitations and wall structure.

To mount the router on a wall, follow these steps:

Step 1

Determine the required distance between mounting holes on the router. Figure 2-4 shows the wall-mount

holes located on the underside of the router.

Note

For most router models, the distance between mounting holes is 8.2 inches (208 mm), as shown

Figure 2-4. For the Cisco 866 and Cisco 867 models, the distance is 7.85 inches (199 mm).

Verify the required distance before drilling the holes.

Figure 2-4 Wall-mount Holes on the Underside of the Router

Step 2

Insert the screws, with anchors, into the wall. Leave 1/8 inch (0.32 cm) between the screw head and the

wall. See

Figure 2-5.

Step 3

Hang the router on the screws, and place the power adapter on a nearby horizontal surface. See

Figure 2-5.

1 Wall-mount holes

31987

3.673 in.8.200 in.

5.961 in.

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 111 112

Nessun commento

Cisco 880 Series Guida di Installazione Pagina 52