Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+= Manuale Utente Scaricare il pdf (Pagina 10)

RSP4+ Bootflash Memory Upgrade to 16MB Installation and Configuration Guide

78-12288-02

Removing the RSP4+

Step 6 Use the RSP4+ handle to carefully pull it straight out of the slot, keeping your other hand under the

carrier to guide it. (See Figure 2.) Keep the RSP4+ parallel to the backplane. Avoid touching the board

or any connector pins.

Step 7 Place the removed RSP4+ on an antistatic mat or foam pad for installation later in this procedure.

Figure 1 Ejector Levers and Captive Installation Screws on the RSP4+—Vertical Orientation Shown

H1482a

Processor module

slot

STOP!

on contact

Bottom ejector lever

Processor

module

carrier guide

1 2 ... 5 6 7 8 9 10 11 12 13 14 15 ... 19 20

Nessun commento

Cisco RSP4+ Bootflash Memory Upgrade to 16MB MEM-16F-RSP4+= Manuale Utente Pagina 10