Cisco uBR904 Specifiche Pagina 10
- Pagina / 38
- Indice
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Configuration Tasks
10
Cisco IOS Release 12.0(3)T
• Exit global configuration mode and attempt to reenter it using the new enable password:
cisco# exit
cisco con0 is now available
Press RETURN to get started.
cisco> enable
Password: guessme
cisco#
Troubleshooting Tips
If you are having trouble:
• Make sure Caps Lock is off.
• Make sure you entered the correct passwords. Passwords are case sensitive.
Configuring Ethernet and Cable Modem Interfaces
To assign an IP address to the Ethernet or cable modem interface so that it can be recognized as a
device on the Ethernet LAN, perform the following tasks, starting in global configuration mode:
Verifying IP Address Configuration
To verify that you have assigned the correct IP address, enter the show arp command:
uBR904# show arp
Protocol Address Age (min) Hardware Addr Type Interface
Internet 172.16.1.1 - 0009.0613.6030 ARPA cable-modem0
Internet 4.0.0.28 - 00e0.1ed7.524d ARPA Ethernet0
Troubleshooting Tips
If you are having trouble:
• Make sure you are using the correct IP address.
• Make sure the cable interface is not shut down. Use the show running-config command to check the cable
interface status.
Step Command Purpose
1 uBR904(config)# interface ethernet 0
or
uBR904(config)# interface modem-cable0
uBR904(config-if)#
Enter interface configuration mode for the Ethernet
and/or the cable modem interface.
2 uBR904(config-if)# ip address
172.16.1.1 255.255.255.0
Assign the appropriate IP address and subnet mask
to the interface.
3 uBR904(config-if)# Ctrl-Z
uBR904#
%SYS-5-CONFIG_I: Configured from console
by console
Return to privileged EXEC mode.
This message is normal and does not indicate an
error.
- Cisco uBR904 Cable Modem 1
- List of Terms 2
- Platforms 3
- Prerequisites 4
- Supported MIBs and RFCs 4
- Functional Description 5
- Configuration Options 7
- Configuration Tasks 8
- • Make sure Caps Lock is off 10
- Configuring Routing 11
- Verifying Routing 12
- Configuring Bridging 13
- Verifying Bridging 14
- Verify Plug-and-Play Bridging 15
- Configuration Examples 17
- Sample Routing Configuration 18
- Command Reference 19
- Cisco IOS Release 12.0(3)T 20
- Syntax Description 21
- Command Mode 21
- Usage Guidelines 21
- Related Commands 22
- Examples 26
- What to Do Next 37
Prodotti e manuali riguardandi Networking Cisco uBR904
Networking Cisco WS-C3020 Manuale Utente
(8 pagine)
(8 pagine)
Networking Cisco AG310 Guida Utente
(87 pagine)
(87 pagine)
Networking Cisco NSLU2 Scheda Tecnica
(14 pagine)
(14 pagine)
Networking Cisco WRT160NL Manuale Utente
(68 pagine)
(68 pagine)
(50 pagine)
Networking Cisco WS-C3548-XL-EN - Catalyst 3548XL Enterprise Edition Switch Manuale Utente
(11 pagine)
(11 pagine)
Networking Cisco 3200 Series Manuale Utente
(6 pagine)
(6 pagine)
Networking Cisco PA-2E3 Specifiche
(68 pagine)
(68 pagine)
Networking Cisco DPC2100 Manuale Utente
(7 pagine)
(7 pagine)
Networking Cisco 3G MicroCell Manuale Utente
(32 pagine)
(32 pagine)
Bos manuels
La liste des produits de Bos contient 57 les manuels et guides d'utilisation des modèles 49 dans les appareils de type 2
Commenti su questo manuale