Cisco SCE8000 Specifiche Scaricare il pdf (Pagina 270)

Cisco SCE 8000 CLI Command Reference

Chapter 2 CLI Command Reference

ip-tunnel l2tp skip

Note that you must access the root level to shut down the line card, even though the DSCP marking

command is at the admin level.

SCE8000> enable 15

Password:<cisco>

SCE8000#> configure

SCE8000(config)#> interface linecard 0

SCE8000(config if)#> shutdown

SCE8000(config if)#> ip-tunnel l2tp skip

SCE8000(config if)#> no shutdown

Related Commands Command Description

show interface linecard ip-tunnel Displays the current IP tunnel configuration.

l2tp identify-by Configures the port number that the LNS and LAC use for

L2TP tunnels.

mpls Configures the MPLS environment.

vlan Configures the VLAN environment.

Nessun commento

Cisco SCE8000 Specifiche Pagina 270