Cisco Router IOS XR Manuale Utente Pagina 36

  • Scaricare
  • Aggiungi ai miei manuali
  • Stampa
  • Pagina
    / 105
  • Indice
  • SEGNALIBRI
  • Valutato. / 5. Basato su recensioni clienti
Vedere la pagina 35
Cisco IOS XR Training Page 36
© 2012 Jeffrey Fry FryGuy.Net
reliability 255/255, txload 0/255, rxload 0/255
Encapsulation ARPA,
Full-duplex, 20000Mb/s
loopback not set,
ARP type ARPA, ARP timeout 04:00:00
No. of members in this bundle: 2
TenGigE0/0/0/0 Full-duplex 10000Mb/s Active
TenGigE0/1/0/0 Full-duplex 10000Mb/s Active
Last input 00:00:00, output 00:00:00
Last clearing of "show interface" counters never
5 minute input rate 1000 bits/sec, 1 packets/sec
5 minute output rate 1000 bits/sec, 1 packets/sec
1509709 packets input, 641971670 bytes, 411 total input drops
0 drops for unrecognized upper-level protocol
Received 5 broadcast packets, 1298355 multicast packets
0 runts, 0 giants, 0 throttles, 0 parity
0 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 0 abort
1518092 packets output, 642666596 bytes, 0 total output drops
Output 6 broadcast packets, 1300886 multicast packets
0 output errors, 0 underruns, 0 applique, 0 resets
0 output buffer failures, 0 output buffers swapped out
0 carrier transitions
RP/0/RSP0/CPU0:c21.lab#
Now, another trick we can do is nested aliases!
Lets modify the alias sint to show the interface as well as the
configuration.
RP/0/RSP0/CPU0:c21.lab(config)#alias sint (var1) show interface $var1; show
run int $var1
RP/0/RSP0/CPU0:c21.lab(config)#commit
RP/0/RSP0/CPU0:c21.lab(config)#
Now we can run that same command [sint(bundle-eth100)]again.
RP/0/RSP0/CPU0:c21.lab#sint(bundle-eth100)
RP/0/RSP0/CPU0:c21.lab#show interface bundle-eth100
Bundle-Ether100 is up, line protocol is up
Interface state transitions: 3
Hardware is Aggregated Ethernet interface(s), address is 6c9c.ed2d.0bab
Internet address is 157.238.206.3/31
MTU 1514 bytes, BW 20000000 Kbit (Max: 20000000 Kbit)
reliability 255/255, txload 0/255, rxload 0/255
Encapsulation ARPA,
Full-duplex, 20000Mb/s
loopback not set,
ARP type ARPA, ARP timeout 04:00:00
Vedere la pagina 35
1 2 ... 31 32 33 34 35 36 37 38 39 40 41 ... 104 105

Commenti su questo manuale

Nessun commento