
Method and Procedure
Field Operations Support MP-2009-08-002/ Issue 10 / Date: 11-01-10
Process Owner: Centralized Operations - Field Operations Support
Information contained in this document is proprietary
Unauthorized disclosure outside CenturyLink Corporation is prohibited
21
telephones or fax machines
HPNA
Connects to the coaxial cable wiring in the house for data and video distribution
LAN 1-LAN 3 W/LAN
4
Four RJ-45 Ethernet ports connect as follows:
• LAN 1 through 3 connect to the Ethernet port on your PC or your home
network
• W/LAN 4 connects to the Ethernet port on your PC if used as a LAN port or
optionally as an Ethernet wide area network (WAN) port that connects to the
service provider network
USB DEVICE
12 Mbps USB port connects to the USB port on your device such as a flash drive
or digital camera
USB PC
12 Mbps USB port connects to the USB port on your PC
DSL
RJ-11 port connects to the DSL line from the service provider
ANTENNA
Receives and transmits data packets to wireless devices
Important! The USB ports on the gateway should not be used!
12.6 Install Gateway
Connect power to gateway. Power gateway on and wait for sync. The LEDs labeled Power and DSL
WAN will light up and stay solid.
12.7 DDR2200 Configuration
The CISCO DDR2200 is configured by default to support DHCP and bonded ADSL2+. The unit as
configured should come out of box with the required configuration to complete the customer premise
installation.
Device Access
information
Open web browser and enter 192.168.1.254 into the address bar. The DDR2200 has
three tiers of access.
Username: admin Password: 1PTV-ADM1N
Username: support Password: 1PTV-SUPPORT
Username: user Password: User
Username: admin Password: 1PTV-ADM1N
Username: support Password: 1PTV-SUPPORT
Username: user Password: User
Commenti su questo manuale