Cisco 15310-MA Guida alla Risoluzione dei Problemi Scaricare il pdf (Pagina 353)

4-45

Cisco ONS 15310-CL and Cisco ONS 15310-MA Troubleshooting Guide, Release 9.0

78-18394-01

Chapter 4 Error Messages

EID-6065 The selected area address is duplicated. Enter another area address.

EID-6066 The primary area address cannot be removed. Refer to the error message text.

EID-6067 The selected area address does not exist. Choose another area address.

EID-6068 The IP-over-CLNS NSEL cannot be modified while there are

IP-over-CLNS tunnel routes provisioned.

You cannot change the NSEL address if

tunnels are provisioned.

EID-6069 The node is currently in ES mode. Only Router 1 can be

provisioned.

An End System needs only one provisioned

router.

EID-6070 No router was selected. Select a router.

EID-6071 The TARP data cache cannot be flushed. You cannot flush the cache in the Tunnel

identifier Address Resolution Protocol

(TARP) state.

EID-6072 The TARP data cache entry cannot be added:

{0}

You cannot add the specified cache entry.

WID-6073 A TARP request has been initiated.

Try refreshing the TARP data cache later.

Refer to the warning message text.

EID-6074 End system mode only supports one subnet. Refer to the error message text.

EID-6075 An error occurred while trying to remove a MAT entry. The

entry does not exist.

CTC is removing the MAT entry.

EID-6076 An error occurred while trying to {0} a TARP manual

adjacency entry:

{1}

CTC cannot add the specified adjacency

entry for reasons unknown.

EID-6077 The area address must be between 1 and 13 bytes long,

inclusive.

The area address should not be more than 13

characters.

EID-6078 A TDC entry with this TID {0} does not exist in the table. The specified Tunnel Identifier does not

exist.

EID-6079 A TDC entry with this TID {0} could not be removed.

Please verify that TARP is enabled.

You must enable TARP in order to remove

the TDC entry.

WID-6080 Router {0} does not have an area address in common with

Router 1. Switching from IS L1/L2 to IS L1 in this case will

partition your network.

Refer to the warning message text.

EID-6081 The limit of 10 RADIUS server entries has been reached. CTC does not allow more than 10 RADIUS

servers.

EID-6082 {0} cannot be empty. The Shared Secrets field should not be

empty.

EID-6083 The entry you selected for editing has been altered by another

user. The changes cannot be committed.

Refer to the error message text.

EID-6084 The RADIUS server entry already exists. Specify another RADIUS server entry.

WID-6085 Disabling shell access will prevent Cisco TAC from connecting

to the vxWorks shell to assist users.

Refer to the warning message text.

EID-6086 The card cannot be changed because card resources are in use. The card you are trying to remove is being

used. Cannot change the card.

Table 4-1 Error Messages (continued)

Error/Warning

ID Error/Warning Message Description

1 2 ... 348 349 350 351 352 353 354 355 356 357 358 ... 379 380

Commenti su questo manuale

Nessun commento

Cisco 15310-MA Guida alla Risoluzione dei Problemi Pagina 353

Commenti su questo manuale

Prodotti e manuali riguardandi Networking Cisco 15310-MA